GX5 Hydraulic Centrifugal Pump

AgXcel has received many requests over the years to offer a centrifugal pump. After a lot of searching and testing, we have settled on the ACE Pumps Oasis Wet Seal Centrifugal Pump.

This pump is ideal for nitrogen applications of any flow range for planters, strip tills, cultivators, NH3 bars, Y drop bars, & more.

The GX5 Centrifugal Pump is designed with the Oasis Wet Seal technology, which means that all the seals inside of the pump are incased in the oil cavity of the pump, meaning that the pump can be ran dry and no seal will burn up. No more having to keep spare seals, or even a spare pump on hand because someone forgot to open a ball valve to a tank before turning the pump on, or needing to spend half of the day replacing the pump due to an air leak or plugged filter on the inlet side of the pump causing the pump to run dry and burn a seal.

The ACE Pump is painted in a black E-coating, which has been used for several years for fertilizer applications and has held its own.

Each GX5 Centrifugal Pump includes a PWM driver and motor, designed for closed center hydraulic systems. AgXcel chose the PWM driver due to our expertise in PWM driven pump systems, and the quality and accuracy that a PWM provides is unbeatable. They deliver the highest grade of reliability, rapid rate response, and require minimal maintenance. If you are in a situation where you are limited on your hydraulic flow output, as more and more guys are every year, this pump only uses as much hydraulic flow as is needed to apply your target rate. Plus the PWM only uses up to 6.5 GPM of hydraulic flow at max flow rate. The PWM also has a built in manual override control that you simply turn to check for proper hydraulic connection is a great feature for ensuring proper hydraulic flow.

Flow Curve Charts

The smaller GX5 Centrifugal Pump model is capable of applying fertilizer as low as 0.8 GPM and up to 110 GPM, while the larger GX5 Centrifugal Pump model is capable of applying fertilizer as low as 8 GPM and up to 140 GPM. So the pump is more than capable of meeting every ones needs for any nitrogen application. 

Each GX5 Centrifugal Pump is pre-plumbed at AgXcel with either a Magnetic Flowmeter or a Turbine Flowmeter. Also included is a Recirculation Valve. The Magnetic Flowmeters are preferred by AgXcel due to their low maintenance, high accuracy, & durability. No moving parts means less points of failure.

• Low Maintenance with an average 1500 hour maintenance schedule
• Up to 140GPM Output
• Low Hydraulic Flow Usage
• Magnetic Flowmeter or Turbine Flowmeter Provided
• Recirculation Valve Included
• Oasis Wet Seal Pump Technology
• PWM Valve & Motor Included and assembled onto the GX5 Pump assembly
• Simple Installation

The AgXcel GX5 Centrifugal Pump series has been utilized to apply infurrow fertilizers infurrow on planters and also to apply nitrogen fertilizers on several types of implements such as Planters, Drills, Air Seeders, Strip Till Toolbars, Y-Drop Toolbars, Cultivators, & NH3 Toolbars. As with all AgXcel pump systems, this GX5 Centrifugal Pump integrates seamlessly into all major OEM liquid controller such as John Deere, Case IH, Raven Industries, AgLeader, Trimble, Precision Planting, & the AgXcel AutoX controller.